Denon DN-HC4500 Operating Instructions - Page 7

3 PART NAMES AND FUNCTION (1) Side Panel uy (2) Front panel #3 ENGLISH #2 #1 #0 @9 @8 @7 @6 @5 @4 i !0 !2 !4 !6 !8 !9 o !1 !3 !5 !7 @0 @1 @2 @3 q w er t q Analog out put terminal (LINE OUT) • This is unbalanced RCA output terminals. • Audio signals outputs. w DRIVE terminal • Connect the DN-D4000/D4500/BU4500 drive unit. For instructions on operating the DN-D4000/ D4500/BU4500, refer to the respective model's operating instructions. e USB B terminal • Connect to a computer. • Sends the USB MIDI and HID commands from the DN-HC4500. • Sends the USB audio signals from a PC. r POWER button • Push this button to turn power on and off. t AC Inlet terminal • Inlet the power cord's plug into DN-HC4500's AC inlet terminal. y Fader start terminals • Use this when your mixer has the Fader Start function. u X-CONROL output terminal • Use this when connected to a DENON DNX900 or DN-X500 mixer that offers X-Control. • With the DN-HC4500 it is possible to convert the input fader position into a MIDI signal and send it from the USB terminal. CAUTION: Note that there are many buttons working two different function selected by short time pushing or long pushing (1second or more). The " " mark indicates short time push function and " " mark indicates long time push function. i TIME, Total [When PCDJ connected] Refer to the PCDJ's manual. [When DN-D4500 connected] • TIME: When this button is pressed, the time indicator switches between "ELAPSED" (elapsed time), "REMAIN" (remaining time). • Total: When this button is pushed for more 1 second, you can display the total time. o FLIP/B TRIM [When PCDJ connected] Refer to the PCDJ's manual. [When DN-D4500 connected] • Push this button to switch between the loop mode/hot start mode and stutter mode. • After setting the B point, the B TRIM MODE can be selected. !0 MEMO, PRESET [When PCDJ connected] Refer to the PCDJ's manual. [When DN-D4500 connected] • MEMO: The MEMO mode starts when this button is pushed once in the Cue/Pause mode. • PRESET: When this button is pushed for more than 1 sec, the PRESET mode menu is displayed. !1 CUE/STUTTER [When PCDJ connected], [When DN-D4500 connected] • Pushing this button in play mode will force the file back to the position which playback started. • In Cue mode, by pushing the CUE button makes a Stutter sound from the Cue point. This is called Stutter play. (Stutter) 3 ENGLISH