Denon DNC615 Operating Instructions - Page 13

ENGLISH 11 BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power be sure that the disc holder has been closed with the OPEN/CLOSE (5) button. CAUTION: • Do not forcibly close the disc holder when the power is off. It may damage the unit when it is transported. 12 PRESET FUNCTIONS AND OPERATIONS (1) List of Preset Functions • Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off. • The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality playback. • One of the preset functions can be used to display information on this set (microprocessor version). Preset function type Description Set upon shipment from factory No. Preset type Program 1 Program 2 Program 3 Power on mode Time mode Random Finish mode Selection of preset type. Setting of whether or not to play program 1. Setting of whether or not to play program 2. Setting of whether or not to play program 3. Setting of operation when power is turned on. Setting of play mode when power is turned on. Setting of time mode when power is turned on. Setting of operation when playback ends. Preset Type 1 1 Program 1 OFF 2 Program 2 OFF 3 Program 3 OFF 4 Power On Stop 5 Time ELAPSED 6 Random OFF 7 Finish Stop 8 Setting of operation when select knob is turned during Next Track Reserve playback. Reserve. OFF 9 Play lock Selection of whether or not to inhibit the panel switches during playback. Play Lock OFF 10 Panel lock Selection of whether or not to enable the panel buttons. Panel OFF 11 Auto cue Setting of whether or not to perform the auto cue operation and the audio startup level. CueDet. OFF 12 Play speed Text display Frame display Standard playing speed setting. Selection of time or text display. Selection of whether or not to display frames. Normal Speed 13 Text OFF 14 FR Disp ON 15 E.O.M. Setting of whether or not to display the EOM and display time setting. E.O.M. 10 s 16 Setting of whether or not to automatically stop the servo Auto stop functions. Sleep 30min 17 RC cord IR remote Play mode RC cord setting. Infrared remote control sensor setting. Setting of play mode when power is turned on. RC DENON 18 IR ON 19 Play CONTINUE 20 Preset function type Description Set upon shipment from factory No. Cascade Preset clear Set information Play list (MP3) Selection of whether or not to output cascade signal. Cascade OFF 21 Setting for clearing presets and setting them to the initial values. Ini. Preset 22 Microprocessor version display. Ver. **** (* = number) 23 Setting of whether or not to perform the play list. Play List OFF 24 (2) Presetting procedure 1 Press the STOP (2) button u while presetting the TITLE button @1. 2 Press the 8 or 9 button o !0 and select the preset item. 3 Press the PLAY (1) button y to change the setting. 4 The preset mode is canceled when the STOP (2) button u. The setting are writeen at this time. 13