Denon DNC615 Operating Instructions - Page 14

ENGLISH (3) Detailed Description of Preset Functions (* = initial setting) 01) "Preset Type (*)" (Three different sets (types) of presettings can be made and used for different purposes.) *01:P No=1 : Set to preset type 1. *01:P No=2 : Set to preset type 2. *01:P No=3 : Set to preset type 3. 02) "Program 1 OFF (ON)" *02:Prg 1 : Store the contents of program 1 when on. (Initial setting - OFF) 03) "Progam 2 OFF (ON)" *03:Prg 2 : Store the contents of program 2 when on. (Initial setting - OFF) 04) "Program 3 OFF (ON)" *04:Prg 3 : Store the contents of program 3 when on. (Initial setting - OFF) 05) "Power On (****)" *05:P On=Stb : Standby mode is set at specified track after TOC is read. *05:P On=Ply : Playback begins in the all repeat mode after TOC is read. *05:P On=Stp : Stop mode is set after TOC is read. 06) "Time Mode" *06:Time=ELA *06:Time=REM : Time display is elapsed time when power is turned on. : Time display is remaining time when power is turned on. 07) "Random ON/OFF" *07:Rand=OFF : Playback mode is normally when power is turned on. *07:Rand=ON : Random playback mode is set when power is turned on. 08) "Finish Mode" *08:Fin=Stop *08:Fin=Next *08:Fin=Recue : Stop mode is set after playback ends. : Standby mode is set at next track after playback ends. : Standby mode is set at playback start position after playback ends. 09) "Next Track Reserve" *09:Rsv=OFF : Specified track is searched for immediately when select knob is turned during playback. *09:Rsv=ON : Track to be searched for is scheduled after playback of current track ends when select knob is turned during playback. 10) "Play Lock" *10:Lock=ON *10:Lock=OFF : Inhibit all operations other than the 1, 3, TIME, 2, PITCH +, - and TITLE buttons during playback. : Enable all functions during playback. 11) "Panel Lock ON/OFF" *11:Pane=OFF : Enable operation of all the buttons on the front panel. *11:Pane=OFF : Inhibit operation of all panel buttons other than those use for presetting operations and OPEN/CLOSE button. 12) "CueDet. Level" *12:CDet.=-** *12:CDet.=OFF : Set the audio detection level for cueing. (-48 / -42 / -36) : Sound startup position is not cued. 13) "CD Pitch" *13:Pit=Norm *13:Pit=+/-*.* : Play at normal speed. : Play at variable speed. ±(0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8 / 3.0), 0Fix 14) "Text Display" *14:Text=OFF *14:Text=ON : Display is set time mode when power is turned on. : Display is set text mode when power is turned on. 15) "Frame Display" *15:Frm=ON *15:Frm=OFF : Display the frames on the time display during playback. : Do not display the frames on the time display during playback. (The frames are displayed in the manual search, standby, pause and end monitor modes.) 16) "EOM Time" *16:EOM=**s *16:EOM=OFF : Set the EOM time. (5 / *10 / 15 / 20 / 30 / 60) : Do not use the EOM function. 17) "Sleep ON (OFF)" *17:Sleep=** : Automatically turn the servo functions off if no button is operated for ** minutes in the pause, standby or manual search mode. (1 / 2 / 5 / 10 / 15 / *30) *17:Slp=OFF : Do not automatically turn the servo functions off. 18) "IR Code" *18:RC=DENON : Receive denon codes. *18:RC=RC5 : RC-5 codes can be received. 19) "IR Remote" *19:IR=ON : Accept infrared remote control signals. *19:IR=OFF : Do not accept infrared remote control signals. 20) "Play Mode" *20:Play=CON : Play mode is continuous when power is turned on. *20:Play=SIN : Play mode is single when power is turned on. 21) "Cascade ON/OFF" *21:Cas=ON : Output the cascade signal (Cascade operation possible) *21:Cas=OFF : Do not output the cascade signal. 22) "Preset Clear (Ini. Preset)" *22:P Init? : Clear the presettings (set to the initial factory values). 23) "Ver = xxxx" : Display the microprocessor version. ("xxxx" is a number.) 24) "Play List" *24:PLst=OFF : Play List does not perform. *24:PList=ON : MP3 is performed according to Play List. 14