Denon DNC615 Operating Instructions - Page 15

TROUBLESHOOTING, 14. SPECIFICATIONS, CD Mechanism Service Life - dimensions

Get Denon DNC615 PDF manuals and user guides View all Denon DNC615 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

ENGLISH 13 TROUBLESHOOTING Make sure of the followings before you consider as any malfunctions : 1. Are all the connections correct? 2. Are all system components being operated correctly in accordance with the operating instructions? 3. Are the speakers and amplifier/receiver functioning correctly? If the tape deck still does not function properly, check the symptom against the list below. If the symptom does not correspond to the check list, please contact your DENON dealer. Problem Cause Remedy Disc holder does not open/close. • Power operation switch is not • Turn the power operation switch turned on. on. When a disc is loaded, "TOC Error" • Disc is not properly loaded. or "No Disc" is displayed. • Reload the disc. When the PLAY (1) button is • Disc is dirty or scratched. pressed, playback does not start. • Clean the disc. There is no sound, or it is distorted. • Output cord is not properly • Connect the output cord properly. connected. • Amplifier adjustment is • Readjust the amplifier. inappropriate. A specific section of the disc will • Disc is dirty or scratched. not play. • Clean the disc. Programmed playback does not • Programmed playback operation • Restart programmed playback. work. has been performed improperly. 14 SPECIFICATIONS 2 CD SECTION Type : Audio Channel : Quantization : Sampling Frequency : Oversampling Ratio : Frequency Response : Total Harmonic Distortion : Signal-to-noise Ratio : Dynamic Range : Channel Separation : Analog Output : Output Level : Load Impedance : Digital Output : Signal Format : Variable Pitch Control : Frame Search Accuracy : Discs : CD Mechanism Service Life : 2 REMOTE 2 GENERAL Headphone Output : Outputs Level : Load Impedance : Power supply : Power Consumption : Dimensions : Installation : Mass : Single-mechanism compact disc player 2 channel stereo 16-bit Liner 44.1 kHz at Normal Pitch 8 times 20 to 20,000 Hz 0.007 % 107 dB 98 dB 90 dB RCA jack 2.0 V at 0 dB disc 10 kΩ / kohms or more RCA jack SPDIF or IEC-958 Type II ±12 % max. 1/75 second Standard compact discs (12 cm and 8 cm) 1000 hours (continuous playback) Wired Remote Control Connection (Stereo mini jack) Remote Control Sensor Stereo 410 mW 33 Ω / ohms 120 V AC ±10 %, 60 Hz (for U.S.A. & Canada models) 230 V AC ±10 %, 50 Hz (for European & U.K. models) 13 W 482 (W) x 88 (H) x 280 (D) mm 19-inch rack mountable (2U) 4.7 kg ✽ For improvement purposes, specifications and design are subject to change without notice. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
15
ENGLISH
13
TROUBLESHOOTING
Make sure of the followings before you consider as any malfunctions :
1. Are all the connections correct?
2. Are all system components being operated correctly in accordance with the operating instructions?
3. Are the speakers and amplifier/receiver functioning correctly?
If the tape deck still does not function properly, check the symptom against the list below. If the symptom does
not correspond to the check list, please contact your DENON dealer.
Problem
Cause
Remedy
Disc holder does not open/close.
• Power operation switch is not
turned on.
• Turn the power operation switch
on.
When a disc is loaded, “TOC Error”
or “No Disc” is displayed.
• Disc is not properly loaded.
• Reload the disc.
When the PLAY (
1
) button is
pressed, playback does not start.
• Disc is dirty or scratched.
• Clean the disc.
There is no sound, or it is distorted.
• Output cord is not properly
connected.
• Amplifier
adjustment
is
inappropriate.
• Connect the output cord properly.
• Readjust the amplifier.
A specific section of the disc will
not play.
• Disc is dirty or scratched.
• Clean the disc.
Programmed playback does not
work.
• Programmed playback operation
has been performed improperly.
• Restart programmed playback.
2
CD SECTION
Type :
Single-mechanism compact disc player
Audio Channel :
2 channel stereo
Quantization :
16-bit Liner
Sampling Frequency :
44.1 kHz at Normal Pitch
Oversampling Ratio :
8 times
Frequency Response :
20 to 20,000 Hz
Total Harmonic Distortion :
0.007 %
Signal-to-noise Ratio :
107 dB
Dynamic Range :
98 dB
Channel Separation :
90 dB
Analog Output :
RCA jack
Output Level :
2.0 V at 0 dB disc
Load Impedance :
10 k
Ω
/ kohms or more
Digital Output :
RCA jack
Signal Format :
SPDIF or IEC-958 Type
II
Variable Pitch Control :
±12 % max.
Frame Search Accuracy :
1/75 second
Discs :
Standard compact discs (12 cm and 8 cm)
CD Mechanism Service Life :
1000 hours (continuous playback)
2
REMOTE
Wired Remote Control Connection (Stereo mini jack)
Remote Control Sensor
2
GENERAL
Headphone Output :
Stereo
Outputs Level :
410 mW
Load Impedance :
33
Ω
/ ohms
Power supply :
120 V AC ±10 %, 60 Hz (for U.S.A. & Canada models)
230 V AC ±10 %, 50 Hz (for European & U.K. models)
Power Consumption :
13 W
Dimensions :
482 (W) x 88 (H) x 280 (D) mm
Installation :
19-inch rack mountable (2U)
Mass :
4.7 kg
✽
For improvement purposes, specifications and design are subject to change without notice.
14
SPECIFICATIONS