Dewalt DCT419S1 Instruction Manual - Page 16

accurately matches the application will help improve accuracy of When the brackets reach the far left or right of the tracking bar, this detecting embedded materials. indicates the end of the data mapped during the pre-scan process. At this point, the main scanning window (O) will also become dark. English Battery Fuel Gauge The display on the hand-held wall scanner includes a battery fuel gauge (R) which consists of four yellow segments that indicate the level of charge remaining in the 12V Max* battery pack. When the level of charge in the battery is below the usable limit, the last segment of the battery fuel gauge will turn red to indicate that the battery will need to be recharged. NOTE: The battery fuel gauge is only an indication of the charge left on the battery pack. It does not indicate product functionality and is subject to variation based on product components, temperature and end-user application. Tracking Bar The tracking bar (S) at the bottom of the main viewing screen gives a macro overview of the number of embedded materials located during the pre-scan data mapping process. The current position of the hand-held wall scanner is indicated by the brackets and shaded area. The tracking bar can be helpful in indicating which way to move the hand-held wall scanner to identify additional embedded materials behind the wall surface. Error Messages SCANNING TOO FAST If the scanning speed exceeds the maximum processing speed of the hand-held wall scanner, the below error message will appear: Remove the hand-held wall scanner from the wall. When the "Begin Scanning" screen appears on the display, place the hand-held wall scanner on the wall to restart the scan. 14