Dewalt DCT419S1 Instruction Manual - Page 17
Scanning Too Slow, Battery Low, Lost Contact With The Wall Surface, Maximum Distance Exceeded
View all Dewalt DCT419S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SCANNING TOO SLOW LOST CONTACT WITH THE WALL SURFACE If the scanning speed is below the minimum processing speed of the If the hand-held wall scanner loses contact with the wall surface, the hand-held wall scanner, the following error message will appear: following error message will appear: English Remove the hand-held wall scanner from the wall. When the "Begin Scanning" screen appears on the display, place the hand-held wall scanner on the wall to restart the scan. BATTERY LOW If the 12V Max* battery pack is about to run out of charge, the following error message will appear: Remove the hand-held wall scanner from the wall. When the "Begin Scanning" screen appears on the display, place the hand-held wall scanner on the wall to restart the scan. MAXIMUM DISTANCE EXCEEDED The hand-held wall scanner has a maximum scanning range of 9.8 feet (3 meters). During pre-scan mapping, if the distance scanned exceeds the maximum distance, the following error message will appear: Replace or recharge the 12V Max* battery pack. Remove the hand-held wall scanner from the wall. When the "Begin Scanning" screen appears on the display, place the hand-held wall scanner on the wall to restart the scan. 15