Dewalt DXGNR7000 Instruction Manual - Page 17

Maintenance, Maintenance Recommendations, Maintenance Schedule, Product Specifications - oil change

Page 17 highlights

Maintenance Maintenance Maintenance Recommendations Regular maintenance will improve performance and extend generator life. See a qualified dealer for service. Generator warranty does not cover items subjected to operator abuse or negligence. To receive full warranty value, operator must maintain generator as instructed in this manual, including proper storage as detailed in Winter Storage and Long Term Storage. NOTICE: Call 1-888-431-6871 with questions about component replacement. Maintenance Schedule Follow maintenance schedule intervals, whichever occurs first according to use. NOTICE: Adverse conditions will require more frequent service. NOTICE: All required service and adjustments should be each season as detailed in the following chart. Maintenance Task As Needed At Each Use Every Season Every 100 Hours Every 200 Hours or Yearly Clean Exte- X rior Surfaces Check X Engine Oil Level Change Engine Oil * X X Clean/ Replace Air Filter ** X X Replace X Spark Plug Check/ X Adjust Valve Clearance *** * Change engine oil after first 30 hours of operation. Change every month when operating under heavy load or in high temperatures. ** Clean air filter more often under dirty or dusty conditions. Replace parts if they cannot be adequately cleaned. *** Check valve clearance after first 50 hours of operation and adjust if necessary. Product Specifications Generator Specifications Rated Power 7.0 kW** Surge Power 8.75 kW Rated AC Voltage 120/240 Rated AC Load Current @ 240V Current @ 120V 29.2 Amps** 58.3 Amps** Rated Frequency 60 Hz @3600 RPM Phase Single Phase Unit Weight 90.7 kg (200 lb.) Unit Dimensions L = 692mm (27.25") x W = 696mm (27.4") x H = 724mm (28.5") ** Operating Temperature Range: -18 deg. C (0 deg. F) to 40 Deg. C (104 Deg. F). When operated above 25 deg. C (77 deg. F) there may be a decrease in power. ** Maximum wattage and current are subject to, and limited by, such factors as fuel Btu content, ambient temperature, altitude, engine condition, etc. Maximum power decreases about 3.5% for each 1,000 feet above sea level; and will also decrease about 1% for each 6° C (10° F) above 16° C (60° F) ambient temperature. Engine Specifications Displacement Spark Plug Part Number Spark Plug Type Spark Plug Gap Gasoline Capacity Oil Type Oil Capacity Run Time (50% Load) Battery 420cc 0J00620106 NHSP LDF7TC 0.028-0.031 inch or (0.70-0.80 mm) 28.4 L (7.5 U.S. gallons) See Chart in Before Starting Generator 1.0 Liters (1.06 qt.) 10.5 Hours 12 VDC, 10 Amp Hour Owner's Manual for Portable Generator 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Maintenance
Owner’s Manual for Portable Generator
13
Maintenance
Maintenance Recommendations
Regular maintenance will improve performance and
extend generator life. See a qualified dealer for service.
Generator warranty does not cover items subjected to
operator abuse or negligence. To receive full warranty
value, operator must maintain generator as instructed in
this manual, including proper storage as detailed in Win-
ter Storage and Long Term Storage.
Call 1-888-431-6871 with questions
about component replacement.
Maintenance Schedule
Follow
maintenance
schedule
intervals,
whichever
occurs first according to use.
Adverse conditions will require more fre-
quent service.
All required service and adjustments
should be each season as detailed in the
following chart.
Product Specifications
Maintenance
Task
As
Needed
At
Each
Use
Every
Season
Every
100
Hours
Every
200
Hours
or
Yearly
Clean Exte-
rior
Sur-
faces
X
Check
Engine Oil
Level
X
Change
Engine Oil *
X
X
Clean/
Replace Air
Filter **
X
X
Replace
Spark Plug
X
Check/
Adjust
Valve
Clearance
***
X
* Change engine oil after
first 30
hours
of operation.
Change every month when operating under heavy
load or in high temperatures.
** Clean air filter more often under dirty or dusty condi-
tions. Replace parts if they cannot be adequately
cleaned.
*** Check valve clearance after
first 50 hours
of oper-
ation and adjust if necessary.
NOTICE:
NOTICE:
NOTICE:
Generator Specifications
Rated Power
7.0 kW**
Surge Power
8.75 kW
Rated AC Voltage
120/240
Rated AC Load
Current @ 240V
Current @ 120V
29.2 Amps**
58.3 Amps**
Rated Frequency
60 Hz @3600 RPM
Phase
Single Phase
Unit Weight
90.7 kg (200 lb.)
Unit Dimensions
L = 692mm (27.25") x W =
696mm (27.4") x H = 724mm
(28.5”)
** Operating Temperature Range: -18 deg. C (0 deg.
F) to 40 Deg. C (104 Deg. F). When operated above
25 deg. C (77 deg. F) there may be a decrease in
power.
** Maximum wattage and current are subject to, and
limited by, such factors as fuel Btu content, ambient
temperature, altitude, engine condition, etc. Maximum
power decreases about 3.5% for each 1,000 feet
above sea level; and will also decrease about 1% for
each 6° C (10° F) above 16° C (60° F) ambient tem-
perature.
Engine Specifications
Displacement
420cc
Spark Plug Part
Number
0J00620106
Spark Plug Type
NHSP LDF7TC
Spark Plug Gap
0.028-0.031 inch or (0.70-0.80
mm)
Gasoline Capacity
28.4 L (7.5 U.S. gallons)
Oil Type
See Chart in
Before Starting
Generator
Oil Capacity
1.0 Liters (1.06 qt.)
Run Time (50% Load)
10.5 Hours
Battery
12 VDC, 10 Amp Hour