Dynex DX-24L230A12 User Manual (English) - Page 8

4 DX-24L230A12/DX-32L220A12/DX-46L261A12 Installing the stand or wall-mount bracket Note The appearance of the product in this User Guide may differ from your actual product, and is for explanatory purposes only. Installing the stand or wall-mount bracket Notes • • If you plan to wall-mount your TV, do not install the stand. Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall mount bracket. To attach your TV to a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the screws that secure the base to the stand, then remove the base. 2 Align the screw holes on the stand with the holes on the bottom edge of the TV, then secure the stand with the screws provided (two M5 x 8 mm screws for the 24" TV, three M5 x 8 mm screws for the 32" TV, and four M5 x 8 mm screws for the 46" TV). Note You must pay attention to the direction of the stand. The wide portion of the stand should go towards the front of the TV. Locators Stand Locating grooves M5 x 8 mm screws 3 Remove the screws what secure the stand column to the TV, then remove the column. Remove the screws 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. DX-24L230A12 (24-inch TV) 3.94 in. (100 mm) 3.94 in. (100 mm) Wall mount brackets