Dynex DX-L19-10A User Manual (English) - Page 13

10 Turning on your TV for the first time Connecting headphones To connect headphones: • Connect the headphones to the headphone jack on the side of your TV. Side of TV 5 Press to highlight DST (Daylight Saving Time), then press or to select On (to automatically change the time for Daylight Saving Time), or Off (to ignore it or set it yourself). Note: Loud noise can damage your hearing. When using headphones, use the lowest volume setting that still lets you hear the sound. Turning on your TV for the first time To configure your TV: 1 Make sure that you have inserted the batteries in the remote control, connected the antenna to the TV, and connect the AC power. 2 Press (Power), then wait several seconds. The initial Setup Wizard screen opens (only the first time you turn on your TV). 6 Press to highlight Air/Cable, then press or to select Air or Cable, depending on the type of antenna connection you have. 7 Press to highlight Auto Scan, then press ENTER or to automatically scan for available channels. 3 Press or to highlight Menu Language, then press or to select the menu language you want. 4 Press to highlight Time Zone, then press or to select your time zone. Auto Scan may take a while to complete. A progress report is displayed while your TV is scanning for available channels. You can press MENU to exit Auto Scan prior to completion, but you will need to run Auto Scan later to complete the process. Auto Scan creates a list of available/receivable channels for the selected signal input.