Dynex DX-L19-10A User Manual (English) - Page 18

Changing channel settings 15 Selecting the audio mode You can select the audio mode for analog channels. To select the audio mode for analog channels: • Press MTS/SAP on the remote one or more times. You can select: • MONO-Select this option if there is noise or static on weak stereo broadcasts. • STEREO-Select this option for programs broadcast in stereo. • SAP-Select this option to listen to a secondary audio program, if available. Note: Mono is automatically selected if the program is broadcast in mono. To select an audio track for a digital channel: • Press MTS/SAP. If an audio track is available, it plays. Playing TV audio only You can turn off the picture on your TV and listen to only the program audio. To play only the TV audio: 1 Press MENU. The on-screen menu opens. Changing channel settings Automatically scanning for channels To auto scan for channels: 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Channel, then press . The Channel menu opens. 2 Press or to highlight Setup, then press . The Setup menu opens. Parental Controls 3 Press or to select Air or Cable. 4 Press or to highlight Auto Scan, then press ENTER. A confirmation box opens. 3 Press or to highlight Audio Only, then press or to select On. 4 Press EXIT to close the menu. Notes: Audio Only works only when the input source is TV and your TV is receiving a broadcast signal. To exit Audio Only mode, press any button. When you exit Audio Only mode, the Audio Only option is automatically reset to Off . 5 Press or to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan.