Dynex DX-L26-10A User Manual (English) - Page 23

Changing channel settings 19 3 Press or to highlight Audio Only, then press or to select On. 4 Press EXIT to close the menu. Notes: Audio Only works only when the input source is TV and your TV is receiving a broadcast signal. To exit Audio Only mode, press any button. When you exit Audio Only mode, the Audio Only option is automatically reset to Off . 4 Press or to highlight Auto Scan, then press ENTER. A confirmation box opens. Changing channel settings Automatically scanning for channels To auto scan for channels: 1 Press MENU. The on-screen menu opens. 5 Press or to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan. Selecting the signal source To select the signal source: 1 Press MENU. The on-screen menu opens. 2 Press or to highlight Channel, then press . The Channel menu opens. 2 Press or to highlight Channel, then press . The Channel menu opens. 3 Press or to select Air or Cable. 3 Press or to select Air or Cable. 4 Press EXIT to close the menu.