Dynex DX-L26-10A User Manual (English) - Page 9

Installing the stand or removing the stand column 5 Removing the stand column You need to remove the stand column before you wall-mount the TV. Note: The appearance of the TV may differ from the illustration in this task. To remove the stand column: 1 Lay the TV flat (screen down) on the edge of a table or bench. Make sure that you put a soft cushion or cloth between the table or bench and the TV. 2 Remove the four screws holding the stand column to the TV, then remove the stand column. Installing a wall-mount bracket If you want to attach the TV to a wall-mount bracket (not provided), you should first remove the stand pedestal if it is pre-attached. To install a wall-mount bracket: 1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched). 2 Remove the four screws that secure the TV to the base. 3 Remove the stand column. See "Removing the stand column" on page 5. 4 Secure the wall-mount bracket to the back of your TV. Stand column