E-Z-GO Shuttle 22 TXT - Electric Owner Manual - Page 54
exceed the impurity levels specified in the table.
View all E-Z-GO Shuttle 22 TXT - Electric manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. . Vent Cap Expansion Space 1/4" to 3/8" (6 mm to 10mm) Plates Gas Vent Vent 1/2" (13 mm) Electrolyte level should be at least 1/2" (13mm) above the plates and 1/4" to 3/8" (6 to 10 mm) below vent Over the life of the battery, a considerable amount of water is consumed. It is important that the water used be pure and free of contaminants that could reduce the life of the battery by reducing the chemical reaction. The water must be distilled or purified by an efficient filtration system. Water that is not distilled should be analyzed and, if required, filtration installed to permit the water to meet the requirements of the water purity table. Even if the water is colorless, odorless, tasteless and fit for drinking, the water should be analyzed to see that it does not exceed the impurity levels specified in the table. Automatic watering devices such as the one included in the Battery Maintenance Kit (P/N 25587-G01) can be used with an approved water source. These watering devices are accurate, easy to use and allow for rapid filling. They also maintain the correct electrolyte level within the battery cells. The watering device should only be used if the electrolyte level is less than 1/2" (13 mm) above top of plates. Page 48 Owner's Guide