Edimax 3G-6218n Manual - Page 12
Method 1: Setting up the router with the CD wizard - firmware upgrade
View all Edimax 3G-6218n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6. Connect the router to your computer via an Ethernet cable. Note: It is recommended that you configure the router through the Ethernet port for the first time. 7. Please check all the LEDs. The "PWR/CHR" LED should be on, and the "ETHERNET" LED should be on if a computer/network device is connected and correctly powered. If the "PWR/CHR" LED is still off and you are sure that the battery and all cable connections are correct, please contact your dealer for assistance. Method 1: Setting up the router with the CD wizard Please follow the following instructions to set up the 3G router with the CD wizard: With the setup wizard in the CD-ROM, you can easily set up a 3G/3.5G connection, an Ethernet connection, SSID, wireless security, or upgrade the router's firmware. After starting the setup wizard, please choose the language of your choice. For more instructions, please refer to the user manual in the supplied CD-ROM. Note 1: 3G/3.5G connections and xDSL/cable connections cannot be used at the same time. Note 2: If you experience compatibility problems with certain 3G USB modem cards, please upgrade the firmware. The latest firmware can be found on the EDIMAX website (www.edimax.com). 11