Edimax 3G-6218n Manual - Page 35
Using, as broadband connection type
View all Edimax 3G-6218n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2-4-5 Using "PPTP" as broadband connection type 1. Select "PPTP" if your ISP is providing you Internet access via PPTP (Point-to-Point Tunneling Protocol). 2. If your ISP is providing you dynamic IP addresses, select "Obtain an IP address automatically" (refer to 2-4-1 for setup details). If your ISP is providing you a static IP address, select "Use the following IP address" (refer to 2-4-2 for setup details). NOTE: These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. 3. Configure the "PPTP Settings" section. 34
34
2-4-5 Using
“
PPTP
”
as broadband connection type
1.
Select “PPTP” if your ISP is providing you Internet access via PPTP (Point
-to-Point
Tunneling Protocol).
2.
If your ISP is providing you dynamic IP addresses, select “Obtain an IP address
automatically” (refer to 2
-4-1 for setup details). If your ISP is providing you a static
IP address, select “Use the following IP address” (refer to 2
-4-2 for setup details).
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
3.
Configure the “
PPTP Settings
”
section.