Electrolux ELFG7437AG Complete Owners Guide - Page 35

35 CONTROLS AND SETTINGS With exception of the sanitize and perfect steamtm, adjustments made to cycle settings and options will be remembered and recalled each time that cycle is selected in the future. the future, select high or max (on select models). To decrease drying time for similar loads, select less (on select models). Select damp for items you wish to partially dry before hanging or ironing. To return to factory settings, press the dryness and options buttons at the same time and hold until the signal sounds. Drying temperature (temp) To change the temperature, press the temp button to scroll to the desired setting. Drying time (time dry) Manually select or change the drying time for a time dry cycle (on select models) by pressing the time dry button to scroll though the available options. Time dry options include 30, 45, 60 and 75 minutes (dependent on model). The auto selection is a default for all auto dry cycles and fast dry cycles and cannot be selected or changed. All actual or predicted dry times will count down on the LED display. For best results Follow the fabric care label instructions on items to be dried. sanitize (on select models) Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired. This option will kill 99.9% of bacteria using a higher temperature required to kill bacteria. Please check fabric care labels to prevent damage. high Recommended for most cotton fabrics. Cycle options To select an option, press options and scroll though the options until the indicator light for the desired option flashes, then press select (set). The indicator will illuminate when the option has been selected. Follow the same steps to deselect an option. The indicator light will turn off when the option is deselected. options select de-select normal Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads. low (on select models) Recommended for delicate fabrics. eco dry (no heat) This setting should only be used with a time dry cycle to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to refresh clothing, stuffed animal, pillows or blankets; and to dust draperies. Dryness level (dryness) To set or change the dryness level, press the dryness button to scroll to the desired setting. The dryness levels include max (on select models), high, normal, low (on select models), and damp. Most Auto Dry cycles default to the normal dryness level. Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in  NOTE To change a cycle option once the cycle has begun, press the start/pause button, make the new selection and press start/ pause again. To protect your fabrics, not all options are available with every cycle. If an option is not available for a cycle, the indicator will not light. Occasionally, two options or settings in the same cycle will conflict with each other, like the perfect steam option and sanitize temperature (on select models). When this happens, the option selected first will cause the conflicting option to not be selectable. perfect steamTM (on select models)The perfect steamTM option injects steam into the clothing prior to cool down to reduce wrinkling, ironing and static cling.