Electrolux ELFG7437AG Complete Owners Guide - Page 40
NORMAL OPERATING SOUNDS, Normal operating sounds, Before operating your dryer
View all Electrolux ELFG7437AG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 NORMAL OPERATING SOUNDS Normal operating sounds A You may or may not hear the following sounds from your new dryer: 1. WATER VALVE (Steam models only.) The flow of water is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to control the water flow. B 2. SUSPENSION ROLLERS The dryer drum is supported by a set of suspension rollers. At times there may be a thumping or rolling sound when the dryer starts. This may happen if the dryer has not been in use for a period of time, or after a heavy load E has remained in the dryer drum for an extended period, creating a temporary D flat spot on the edge of the roller. The noise should dissipate as the dryer C operates and the flat spots smooth out. 3. AIR FLOW SYSTEM Your dryer is equipped with a high volume air Before operating your dryer handling system. In some installations Read the important instructions in this there may be some sounds associated section of the Use & Care Manual before with air movement throughout the operating your dryer. dryer, including the air duct, blower, and exhaust system. This is normal and can vary with load size and type. WARNING 4. GAS VALVE (Gas models only.) The flow of gas is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to control the gas flow. To reduce the risk of fire, electric shock or injury to persons, read the Important Safety Information in this Use & Care Manual before operating your dryer. 5. GAS BURNER (Gas models only.) When the burner is operating, there may be sounds generated as the air flow mixes with the gas flame. This noise is normal and will only occur when the gas is ignited in the combustion tube.