Epson 10600 Printer Guide - Page 30
Charging takes about 10 minutes. Do not turn off the printer or interrupt
UPC - 010343845510
View all Epson 10600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setting Up the Printer | 1-15 Warning 6. Hold the cartridge so the arrow mark on its left side is pointing toward the printer. Insert the cartridge into the slot. Don't force it. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. Note 7. Push the clamp back up into the locked position. If you can't insert the cartridge smoothly, you may have the wrong cartridge. Caution Do not turn off the printer, change the position of the paper set lever, or open the lower cover or ink compartment cover while the printer is charging ink. 8. Repeat step 4 through step 7 for the other ink cartridges. When you're done, close the ink compartment cover. The printer begins charging the ink delivery system. The Pause light on the control panel flashes and the printer makes various sounds. Charging takes about 10 minutes. Do not turn off the printer or interrupt this process or you'll use more ink than necessary. When the Pause light stops flashing and Paper Out appears on the control panel display, you're ready to load the roll paper. 1-15