Epson ActionNote 4000 User Manual - Page 79

Connecting a Serial Device, port to connect serial devices such as

Get Epson ActionNote 4000 PDF manuals and user guides View all Epson ActionNote 4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

5. If the connector has retaining screws, tighten them by hand or with a screwdriver. 6. Connect the other end of the cable to the printer. If the printer interface has retaining clips, squeeze them gently until they snap into place. 7. Connect the printer's power cable to a grounded (earthed) electrical socket. 8. Now run SETUP as described in Chapter 2 to set the Parallel option to Ext printer. Connecting a Serial Device You can use the COM 1 port to connect serial devices such as a serial printer or plotter. You could also connect a modem or mouse. Follow these steps to connect a serial device: 1. Make sure both the computer and the serial device are off. Connecting Optional Devices 5-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
5.
6.
7.
8.
If the connector has retaining screws, tighten them by hand
or with a screwdriver.
Connect the other end of the cable to the printer. If the
printer interface has retaining clips, squeeze them gently
until they snap into place.
Connect the printer’s power cable to a grounded (earthed)
electrical socket.
Now run SETUP as described in Chapter 2 to set the
Parallel option to Ext printer.
Connecting a Serial Device
You can use the
COM
1 port to connect serial devices such as a
serial printer or plotter. You could also connect a modem or
mouse.
Follow these steps to connect a serial device:
1.
Make sure both the computer and the serial device are off.
Connecting Optional Devices
5-5