Epson C117001-N User Manual - Page 140
manual accompanying your interface board., Secure the cable using the plastic clamp on the left side.
![]() |
UPC - 010343816480
View all Epson C117001-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
8. Remove the screw from the CG (chassis ground) connector on the printer and then use the cross-head screwdriver to connect the FG wire from the interface board to the CG connector, as shown below. 9. Set the DIP switches on the interface board according to the manual accompanying your interface board. 10. Secure the cable using the plastic clamp on the left side. 11. Close the interface cover. Using the Printer Options 6-21
![](/manual_guide/products/epson-c117001n-user-manual-f7b3efd/140.png)
8.
Remove the screw from the CG (chassis ground) connector on
the printer and then use the cross-head screwdriver to connect
the FG wire from the interface board to the CG connector, as
shown below.
9.
Set the DIP switches on the interface board according to the
manual accompanying your interface board.
10. Secure the cable using the plastic clamp on the left side.
11. Close the interface cover.
Using the Printer Options
6-21