Epson C117001-N User Manual - Page 203
Interface timing, Technical Specifications B-9
UPC - 010343816480
View all Epson C117001-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Note: l All interface conditions are based on TTL level. Both the rise and fall of each signal must be less than 0.2 microseconds. * Data transfer must be carried out by observing the ACKNLG or BUSY signal. (Data transfer to this printer can be carried out only after the receipt of the ACKNLG signal or when the level of the BUSY signal is LOW). The column heading "Direction" refers to the direction of the signal flow as viewed from the printer. "Return" denotes the twisted-pair return to be connected at signal ground level. For the interface wiring, be sure to use a twisted-pair cable for each signal and to complete: the connection on the return side. Interface timing The figure below shows the timing for the parallel interface. Technical Specifications B-9