Epson C117001-N User Manual - Page 150
Command Summary 8-3
UPC - 010343816480
View all Epson C117001-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
The simplest type of command consists of a single character to be sent to the printer. For instance, to print in condensed mode the code format is: ASCII code: SI Decimal: 15 Hexadecimal: 0F This code can be sent from a program by sending the code 15 directly. More complex commands consist of two or more character codes. For example, to print in double-wide mode the code format is the following: ASCII code: ESC W n Decimal: 27 87 n Hexadecimal: 1B 57 n In this case n can be either 1 or 0, to begin or end double-wide printing. You can use either of the following commands to turn ON double-wide print from BASIC: LPRINT CHR$(27);CHR$(87);CHR$(l) LPRINT CHR$(27);"W";CHR$(l) For the following commands that use only 0 or 1 for the variable, either the decimal or hexadecimal values 1 and 0 or the ASCII characters 1 and 0 can be used: ESC U, ESC x, ESC p, ESC W, ESC S, ESC-, and ESC % For example, in BASIC you can turn on proportional spacing with either of these statements: LPRINT CHR$(27);"p";CHR$(1) LPRINT CHR$(27);"p";"1" Command Summary 8-3