Epson C117001-N User Manual - Page 147
B 40 1B 55 31. Each hex 1B represents the Escape code
![]() |
UPC - 010343816480
View all Epson C117001-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
To use the data dump mode, follow these steps: 1. To enter the data dump mode, hold down the FORM FEED and LINE FEED buttons at the same time while you turn on the printer. 2. Next, run either an application program or one you have written in any programming language. Your printer prints all the codes sent to the printer in hexadecimal format as shown below: 3. To turn off the data dump mode, press the ON LINE button to take the printer off line, and then turn off the printer. (The data dump mode can also be cancelled by sending an INIT signal from the computer.) Look at the data dump shown in Step 2. By comparing the characters printed in the right column with the printout of the hexadecimal codes, you can check what codes are being sent to the printer. If characters are printable, they appear as their true ASCII characters. Nonprintable codes, such as control codes, are represented by dots. As an example of how to interpret a data dump printout, look at the first five hex codes on the first line of the printout sample (1B 40 1B 55 31). Each hex 1B represents the Escape code, 40 represents @, 55 represents U, 31 represents the numeral 1. Check the first line of the right column and you will find a dot, an @ sign, another dot, a U, and a 1. If you look in the Command Summary in Chapter 8, you will see that these are the commands to initialize the printer and turn on unidirectional mode. Troubleshooting 7-7
![](/manual_guide/products/epson-c117001n-user-manual-f7b3efd/147.png)