Epson C11C605001 User's Guide - Page 18
Selecting a Font and Pitch, Changing the Printer’s Default Settings, Using SelecType Mode - paper jam
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Button/Light l Pause button Pause light m Paper Out light Function Stops printing temporarily, and resumes printing when pressed again. On when the printer is paused. Flashes when the print head overheats. On when the printer is out of paper. Flashes when paper jams or the printer fails to eject paper. Selecting a Font and Pitch Usually, you use your application program to select the font and pitch you want to use in a document. If necessary, however, you can select one of the printer's fonts (in different pitches) with the buttons on the printer's control panel, as described below. (The settings you make in application programs usually override settings you make from the printer's control panel.) The pitches available depend on the font you select: Font High Speed Draft Draft Roman Sans Serif Pitch 10, 12, 15, 17, 20 10, 12, 15, 17, 20, Proportional 10, 12, 15, 17, 20, Proportional 10, 12, 15, 17, 20, Proportional 1. Make sure that the printer is not printing. If it is, press the Pause button to stop printing. 2. Press the Font button. The first available font is displayed on the LCD. Press the Font button until you see the font you want to use. The LCD returns to its original state in a few seconds and the font you selected is set. 3. Press the Pitch button. The first available pitch is displayed on the LCD. Press the Pitch button until you see the pitch you want to use. The LCD returns to its original state in a few seconds and the pitch you selected is set. 18 Selecting a Font and Pitch Changing the Printer's Default Settings While you can change many printer settings through your application software or the printer driver, there are other printer functions you can control as follows: ❏ Using the Epson Remote Configuration Manager on the printer software CD-ROM. (See page 8.) ❏ Using the printer's control panel to access SelecType mode and Defaultsetting mode For instructions on using the Remote Configuration Manager, see the on-screen Remote Configuration Manager User's Guide, installed when you installed your printer software. (See page 8.) To use SelecType, follow the instructions below. For Default-setting mode, see page 20. Using SelecType Mode The table below lists the settings available in SelecType mode. Setting Language Print settings Page length for rear tractor Page length for front tractor Skip over perforation Line spacing Left margin Right margin Platen gap Auto tear off Auto line feed Print direction Options (default in bold) English, French, German, Italian, Spanish, Portuguese Press the SetD (Top of Form) button to print all current settings. 3 inches, 3.5 inches, 4 inches, 5.5 inches, 6 inches, 7 inches, 8 inches, 8.5 inches, 11 inches, 70/6 inches, 12 inches, 14 inches, 17 inches 3 inches, 3.5 inches, 4 inches, 5.5 inches, 6 inches, 7 inches, 8 inches, 8.5 inches, 11 inches, 70/6 inches, 12 inches, 14 inches, 17 inches Off, On 1/6 inch, 1/8 inch 0 column to 80 columns 1 column to 136 columns Auto, 0 to 15 Off, On Off, On Bi-D, Uni-D