Epson C11C605001 User's Guide - Page 9

English Chapter 2 Loading Paper Using the Two-Tractor System Your printer can load paper from a front tractor and a rear tractor. Be sure to leave enough room around the printer for the two stacks of fresh paper and for the printed stack. Align your paper supply so the paper feeds smoothly into the printer. front tractor rear tractor both tractors You can print on continuous paper from 3 inches (76.2 mm) to 16.5 inches (419.1 mm) wide. Your printer senses the paper width automatically. The printer automatically adjusts to the thickness of the paper loaded when the platen gap setting is set to Auto in SelecType mode. See "Using SelecType Mode" on page 18 for details. Note: ❏ Make sure your paper matches the specifications described in the on-screen Reference Guide. ❏ When the optional perforation cutter (part number C81507X) is installed, the printable width is from 4 inches (101.6 mm) to 16 inches (406.4 mm). Loading Paper On the Front Tractor 1. Lift up the front cover until it locks in place. Place the paper supply lower than the printer to avoid a paper jam. Make sure that your stack of printed pages does not interfere with the rear tractor's paper supply. Supported Paper Types and Sizes You can use the following types of continuous paper with either tractor: ❏ Single-sheet ❏ Multi-part ❏ Labels ❏ Continuous forms with labels ❏ Overlapping multi-part forms 2. Release the right and left sprockets by pulling the lock levers down. sprocket lock lever Loading Paper 9