Epson C11C605001 User's Guide - Page 19

Setting Software 0 slash I/F (Interface) mode Auto I/F (Interface) wait time Parallel I/F bi-directional mode Packet mode Serial baud rate Serial parity Serial data length Character table Auto CR (IBM PPDS)*1 IBM character table (IBM PPDS)*1 Buzzer Low-noise mode Auto cut mode*2 Auto cut/back mode*2 Overlapping multipart forms Continuous forms with labels Skip over binding Get IP address*3 IP address*4 Options (default in bold) ESC/P,® IBM PPDS Off, On Auto, Parallel, Serial, USB, Optional 10 seconds, 30 seconds Off, On Auto, Off 19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS, 1200 BPS, 600 BPS, 300 BPS None, Odd, Even, Ignore 8-bit, 7-bit Standard version: PC437, PC850, PC860, PC863, PC865, PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO 8859-15, Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1 NLSP version: PC437, PC850, PC860, PC863, PC865, PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO 8859-15, PC437 Greek, PC853, PC855, PC852, PC857, PC866, PC869, MAZOWIA, Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774, Estonia, ISO 8859-2, PC866 LAT., PC866 UKR, PC APTEC, PC708, PC720, PCAR864, PC771, PC437 Slovenia, PC MC, PC1250, PC1251, Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1 Off, On Table 2, Table 1 Off, On Off, On Off, On Off, On Off, On Off, On Off, On Panel, Auto, PING 000.000.000.000 to 255.255.255.255 Setting Subnet mask*3 Default gateway*3 Save settings?*5 Options (default in bold) 000.000.000.000 to 255.255.255.255 000.000.000.000 to 255.255.255.255 Yes, No *1 This setting is available only in IBM PPDS emulation mode. *2 This setting is available only when the optional perforation cutter (#C81570X) is installed. *3 These settings are available only when the optional Print Server is installed. *4 This setting is available only when the optional Print Server is installed and the Get IP address setting is set to Panel or PING. *5 This menu appears when you press the Menu buttons (Tear Off and Top of Form) in SelecType mode. Follow these steps to enter SelecType mode and change the settings: 1. Make sure paper is loaded and the printer is on. 2. Press the Menu buttons (Tear Off and Top of Form) to enter the SelecType mode. The LCD displays the currently selected language. 3. If you want a different language, press the SetU (Tear Off) or SetD (Top of Form) button until you see the language you want. 4. Press the ItemD (Pitch) button to set the desired language. 5. You see Print Settings on the LCD. Press the SetD (Top of Form) button to print the current settings. 6. Press the ItemU (Font) or ItemD (Pitch) button to select the setting you want to change. Note: You can scroll the menu settings by holding down the ItemU (Font) or ItemD (Pitch) button for a few seconds. 7. Press the SetU (Tear Off) or SetD (Top of Form) button to scroll through the options available for the current setting until you see the one you want. Note: You can scroll the options by holding down the SetU (Tear Off) or SetD (Top of Form) button for a few seconds. 8. When you finish making settings, press and hold down the Menu buttons (Tear Off and Top of Form). The LCD displays Save Setting. Using SelecType Mode 19 English