Epson C7500 Technical Reference Guide - Page 195
Perforated line, Length of the, uncut portion, Length of the portion, mm {0.20} or more
View all Epson C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Appendix Media type Media source Backing paper width Label width Label length Gap between labels Left and right outer edges Label edge R Width of a black mark Length of a black mark Black mark position Gaps between black marks Paper thickness Perforated line pitch Form of perforated line Number of folds Plain label / Matte label Fanfold paper 50 to 112 mm {1.97 to 4.41"} 46 to 108 mm {1.81 to 4.25"} 25.4 to 301.8 mm {1 to 11.88"} 3 to 6 mm {0.12 to 0.24"} 2 mm 0.5 mm {0.08 0.020"} 1.5 mm {0.06"} or less 28 mm {1.10"} or more from paper edge 5 mm {0.20"} or more Right edge of back of paper, when feed edge is at top 28.4 to 304.8 mm {1.12 to 12.0"} 0.161 to 0.164 mm {0.006 to 0.006"} (reference value) 203.2 to 304.8 mm {8 to 12"} 1 mm {0.039"} uncut, 5 mm {0.20"} cut 750 or less Do not use the paper with a hole or cutout. Autocutting on the perforated lines may generate minute paper dust, causing machine prob- lems. Also, autocutting ahead of the perforated line may cause problems when feeding paper. Therefore, autocutting must be performed 0.5 mm to 1 mm {0.02 to 0.039"} behind the perforated line. Therefore, set the black mark position 2 mm {0.08"} or more from the perforation. For the black mark position of the die-cut label paper, match the label edge to the black mark edge. The perforations on both sides of the paper shall be uncut. 1 mm { 0.04"} 1 mm { 0.04"} Perforated line Length of the uncut portion Length of the portion 195