Epson C7500 Technical Reference Guide - Page 204
printing might protrude beyond the paper/ label, depending on the actual print position
![]() |
View all Epson C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
When "Borderless Printing" is enabled Vertical margins: 0 mm (Typical value) Lateral margins: 0 mm (Typical value) Perforated line Auto-cut position Paper width 0.5 to 1 mm { 0.02 to 0.04"} 1.5 to 3.0 mm {0.06 to 0.12" } Paper feeding direction 25.4 mm {1.0" } or more 28.4 mm {1.12" } or more Issuing pitch (Ph) Auto-cut position Interval of perforated lines (Pm) 1.5 to 3.0 mm {0.06 to 0.12" } Perforated line Auto-cut position Outer edge (Removed) 2.0 mm { 0.08" } Print area width 1.5 to 3.0 mm { 0.06 to 0.12"} Outer edge (Removed) 2.0 mm { 0.08" } Print area Label area Paper Black mark position If you enabled "Extend Printable Area", printing is done with settings for no margins, but the printing might protrude beyond the paper/ label, depending on the actual print position and the set position for the paper/ label. To make sure printing doesn't protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages because it fails to sense their black marks or skips them, etc. 204
![](/manual_guide/products/epson-c7500-technical-reference-guide-ce0e52d/204.png)