Epson C7500 Technical Reference Guide - Page 59
The Paper LED turns off when the, paper is set properly. If the Paper LED stays
![]() |
View all Epson C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 2 Setup CAUTION If the guide panel does not match the paper width, it could cause misaligned printing or paper jams. Be careful of the following. Do not allow a gap to occur between the guide panel and the edge of the paper. 2 Do not press the guide panel strongly against the edge of the paper. 12Insert the end of the paper into the paper feed slot. The paper starts to feed automatically after about 4 cm is inserted. The Paper LED turns off when the paper is set properly. If the Paper LED stays on, the paper is not set properly. Set the paper again. Paper Feed Slot 59
![](/manual_guide/products/epson-c7500-technical-reference-guide-ce0e52d/59.png)
59
Chapter 2
Setup
2
12
Insert the end of the paper into the paper feed slot. The paper starts to feed
automatically after about 4 cm is inserted.
The Paper LED turns off when the
paper is set properly. If the Paper LED stays on, the paper is not set properly.
Set the paper again.
CAUTION
If the guide panel does not match the paper width, it could cause misaligned printing or paper
jams. Be careful of the following.
Do not allow a gap to occur between the
guide panel and the edge of the paper.
Do not press the guide panel strongly against
the edge of the paper.
Paper Feed Slot