Epson C82WN User Setup Information - Page 29
Setting Up a Network Port, Setting Up a Network Port on Windows XP or 2000 - stylus c82 not printing
![]() |
UPC - 010343845046
View all Epson C82WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting Up a Network Port The steps for setting up a network port vary depending on your operating system. Before you begin, print a status page and note the IP address of your print server. Make sure the printer driver and status monitor are installed, as described on page 16. Then follow the instructions in one of these sections: ■ If you're using Windows XP or 2000, follow the steps below. ■ If you're using Windows Me, 98, or 95, go to page 27. ■ If you're using Windows NT, go to page 29. Setting Up a Network Port on Windows XP or 2000 The process of setting up a network port is similar on Windows XP and Windows 2000. Although this section shows Windows XP, you'll see similar screens in Windows 2000. For either system, make sure you are logged in to the computer as an administrator. 1. Do one of the following: ■ In Windows XP, click Start > Control Panel > Printers and Other Hardware > Printers and Faxes. ■ In Windows 2000, click Start > Settings > Printers. 2. Right-click the EPSON Stylus C82 Series printer icon, then click Properties. 3. On the Ports tab, click Add Port. You see this window: 4. Select Standard TCP/IP Port and click New Port. You see the Add Standard TCP/IP Printer Port wizard. Configuring Wireless Printing for Windows 25
![](/manual_guide/products/epson-c82wn-user-setup-information-ae82519/29.png)