Epson C82WN User Setup Information - Page 34

Setting Up Additional Computers

Get Epson C82WN - Stylus Color Inkjet Printer PDF manuals and user guides
UPC - 010343845046
View all Epson C82WN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

If it fails to print, try the following: ■ Make sure that the printer and print server are connected and that both are on. ■ Check the printer to see if a red light is on or flashing, indicating that paper or ink is out, or paper is jammed. See Printer Basics for details. ■ Check WP-Admin to make sure you have a signal (see page 20). ■ Make sure you entered the correct IP address and server name in step 5. Now you're ready to print. For instructions, see Printer Basics. Setting Up Additional Computers You need to install the EPSON Stylus C82WN printer driver and status monitor and configure a network port on every computer using the printer. ■ For computers on a wired network that has a wireless access point, skip to step 3. ■ For computers that have wireless network interfaces, follow all of these steps: 1. Make sure your computer's wireless mode is set to either Infrastructure, if you are connecting to the printer through an access point, or 802.11b Ad Hoc if you are connecting without an access point. If your wireless adapter doesn't include an 802.11b Ad Hoc option, select Ad Hoc, Computer-to-Computer, or whatever mode your adapter uses to communicate without an access point. Do not select a pseudo ad hoc or proprietary ad hoc mode. 2. If you're using infrastructure mode, make sure there is a link with good signal strength between the computer and the access point. 3. Follow steps 1 through 7 starting on page 16. 4. If you're using Windows Me, 98, or 95, double-click Install EpsonNet Direct Print Utility on the EPSON Installation Program screen and follow the instructions to install the utility. 5. Go to page 25 and follow the appropriate set of instructions for setting up a network port. 30 Configuring Wireless Printing for Windows

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
30
Configuring Wireless Printing for Windows
If it fails to print, try the following:
■
Make sure that the printer and print server are connected and that
both are on.
■
Check the printer to see if a red light is on or flashing, indicating that paper or
ink is out, or paper is jammed. See
Printer Basics
for details.
■
Check WP-Admin to make sure you have a signal (see page 20).
■
Make sure you entered the correct IP address and server name in step 5.
Now you’re ready to print. For instructions, see
Printer Basics
.
Setting Up Additional Computers
You need to install the EPSON Stylus C82WN printer driver and status monitor and
configure a network port on every computer using the printer.
■
For computers on a wired network that has a wireless access point, skip to step 3.
■
For computers that have wireless network interfaces, follow all of these steps:
1.
Make sure your computer’s wireless mode is set to either
Infrastructure
, if you
are connecting to the printer through an access point, or
802.11b Ad Hoc
if you
are connecting without an access point.
If your wireless adapter doesn’t include an
802.11b Ad Hoc
option, select
Ad
Hoc
,
Computer-to-Computer
, or whatever mode your adapter uses to
communicate without an access point.
Do not
select a pseudo ad hoc or
proprietary ad hoc mode.
2.
If you’re using infrastructure mode, make sure there is a link with good signal
strength between the computer and the access point.
3.
Follow steps 1 through 7 starting on page 16.
4.
If you’re using Windows Me, 98, or 95, double-click
Install EpsonNet Direct
Print Utility
on the EPSON Installation Program screen and follow the
instructions to install the utility.
5.
Go to page 25 and follow the appropriate set of instructions for setting up a
network port.