Epson C82WN User Setup Information - Page 43
Configuring the Print Server, If WP-Admin picks up a signal from more than one print server
UPC - 010343845046
View all Epson C82WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
9. Continue with the following instructions to configure the print server. Configuring the Print Server After your print server is set up and plugged in, you're ready to configure it for your Macintosh. 1. On the Wireless Server Search screen, click START. WP-Admin picks up the signal from the print server and displays information like the following: This information appears when the server is found This number indicates the signal strength Note: If WP-Admin fails to pick up a signal from the print server, try holding down the print server's test button for five seconds to reset it. The lights go out, then both the green and yellow lights on the print server come on briefly. The yellow light remains on when your network has a connection to the print server. If it still fails to pick up a signal, check the solutions beginning on page 44. If WP-Admin picks up a signal from more than one print server, select the connection that matches the MAC address on the back of your print server. 2. Check the signal strength to make sure you have a strong link to the print server. 3. When you have a link, click CONFIGURE. You see the following: Click OK Configuring Wireless Printing for Macintosh 39