Epson CX6000 Product Information Guide - Page 11
Printing the Date on Photos, Printing From a Digital Camera - stylus manual
UPC - 010343858992
View all Epson CX6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Epson Stylus CX6000 Series 4. Press the C Memory Card button until the Print All/PictBridge light comes on. 5. If your memory card contains DPOF information, you see DPOF on the photo viewer screen. 6. Select Photo Paper, Matte Paper, or Plain Paper (whichever you loaded). 7. If you select Plain Paper, your photos print with a white border. If you select Photo Paper or Matte Paper, your photos print borderless, to the edge of the paper. 8. Select Letter, 4"x6", or 5"x7" for paper size. 9. Press the x Start button to start printing. Note: If the memory card does not contain DPOF information, one copy of all the photos on the card will be printed. If you need to stop printing, press the y Stop/Clear Settings button. Printing the Date on Photos You can print the date that your photos were taken on the corner of the photo. Note: The date printed on your photos is the date your photo was taken, not when it was printed. 1. Make sure your CX6000 Series is not connected to your computer (or your computer is turned off). 2. Load the type of paper you want to use (see page 4). You can load more paper later as necessary to print all your photos. 3. Insert the memory card (see page 8). 4. Press the Setup/Utilities button. 5. Press the l or r button to select Press Start to add a date to photos. 6. Press the x Start button. 7. Press the u or d button to select the date format you want to print. ❏ yyyy.mm.dd (2006.06.16) ❏ mmm.dd.yyyy (Jun.16.2006) ❏ dd.mmm.yyyy (16.Jun.2006) 8. Press the x Start button. 9. Press the Setup/Utilities button to return to memory card mode. Follow the steps in one of the previous sections to print your photos. Printing From a Digital Camera If your camera is PictBridge™- or USB DIRECT-PRINT™compatible, you can print your JPEG photos by connecting your digital camera directly to your CX6000 Series. Your photos must be sized from 80 × 80 pixels to 9200 × 9200 pixels. 1. Make sure your CX6000 Series is not printing. 2. Remove any memory cards from slots. 3. Load the type of paper you want to use (see page 4). Load enough sheets for the number of photos you'll be printing. 4. Press the paper type button to select Photo Paper or Matte Paper to print borderless photos (without a white border). Select Plain Paper if you want your photos printed with a small white border. 5. Press the paper size button to select Letter, 4"x 6", or 5"x 7". 6. Connect the USB cable that came with your camera to the USB connector on the front of your CX6000 Series. 7. Make sure your camera is turned on. 8. The Print All/PictBridge light on the CX6000 Series turns on and one of these screens appears on the photo viewer screen. 9. Select the photos you want to print with your camera. Then adjust any necessary settings and print your photos as explained in your camera manual. 6/06 11