Epson CX6000 Product Information Guide - Page 8

Epson Stylus CX6000 Series 9. Press the x Start button to begin copying. The On light flashes and after a moment the CX6000 Series starts printing. If you need to stop copying, press the y Stop/ Clear Settings button. Do not pull out paper that is being printed; it will be ejected automatically to the output tray. Note: The copies may not be exactly the same size as the original. Copying a Photo 1. Make sure the CX6000 Series is turned on. 2. Place a photo on the glass as described on page 6, or place multiple photos as described on page 7. Be sure to close the document cover. 3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo or matte paper (see page 4 if you need instructions). 4. Press the Photo button. 5. Press the l or r button to select Restoration On to automatically restore the colors in faded photos as you copy. If your photos are not faded, select Restoration Off. Note: The copies may not be exactly the same size as the original. Making a Quick Copy If you want to make a copy quickly and do not need high quality, you can print a "draft" copy. The print quality is reduced, but the copy is printed faster. 1. Load up to 100 sheets of plain letter-size paper (see page 4 if you need instructions). 2. Place your document or photo on the glass as described on page 6. Be sure to close the document cover. 3. Press the Setup/Utilities button. 4. Press the l or r button to select Press Start to adjust the copy quality. 5. Press the x Start button. 6. Press the u or d button to select Draft. 7. Press the x Start button to save your setting. 8. Press the paper type button to select Plain Paper. 9. Press the paper size button to select Letter. 10. Press the Setup/Utilities button to return to Copy mode. 11. Press the x Start button to make a draft copy. Before copying other documents or photos, press the Setup/ Utilities button and change the copy quality setting back to either Normal or Photo. 6. Press the x Start button to scan and preview your photos on the photo viewer screen. 7. Press the l or r button to view your photos. 8. Press the u or d button to select the number of copies you want of each photo. 9. Press the paper type button to select Photo Paper or Matte Paper to print borderless photos (without a white border). Select Plain Paper if you want your photos printed with an 0.06-inch border. 10. Press the paper size button to select 4"x6", 5"x7", or Letter. Your photo will be automatically sized to fit on the size of paper you select. 11. Press the x Start button to print your photos. The On light flashes and after a moment the CX6000 Series starts printing. If you need to stop copying, press the y Stop/Clear Settings button. Do not pull out paper that is being printed; it will be ejected automatically to the output tray. Printing From a Memory Card Inserting the Memory Card 1. Make sure the CX6000 Series is turned on. Note: When you print directly from a memory card, it is best if the CX6000 Series is not connected to your computer (or your computer should be turned off). If you see a message on your computer screen when you insert a card in the CX6000 Series, just cancel the operation and close the screen. 2. Open the memory card door. 8 6/06