Epson ColorWorks C3400-LT Technical Reference Guide - Page 108

Media Loading Settings Sets paper feed movement to the print starting position when turning the printer power on or the roll paper cover is closed. The following is the movements to feed the paper to the print starting position when turning the printer power on or the roll paper cover is closed. (Default setting is [Media Loading Method (with Cutting)]. The user does not need to set when using with default setting.) Setting Specification Power ON Roll paper cover close When either black mark detection or detection of gaps between labels is set for media position detection, the top of black mark or the top of label is detected by the Media Load- black mark detector or the label detector at the ing Method power-on, and the paper is fed to the print starting   (with Cutting) position. When no position is detected, the specified amount of paper is fed. After paper feeding, the printer enters the stand-by mode with performing autocutting. When either black mark detection or detection of gaps between labels is set for media position detection, the top of black mark or the top of label is detected by the Media Load- black mark detector or the label detector at the ing Method  power-on, and the paper is fed to the print starting   (without Cut- position. ting) When no position is detected, the specified amount of paper is fed. After paper feeding, the printer enters the stand-by mode without performing autocutting. No Media The printer does not feed the paper to the print starting Loading position at power-on.  - Method 1 Turn the printer on. 2 Display the printer driver window. (See "How to Use the Printer Driver" on page 65 for how to display the driver window.) 3 Select [Maintenance And Utilities] tab, and click [Media Loading Settings]. 108