Epson ColorWorks C3400-LT Technical Reference Guide - Page 135

Return Value, Description

Get Epson ColorWorks C3400-LT PDF manuals and user guides View all Epson ColorWorks C3400-LT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 135 highlights

Chapter 6 Application Development Information Return Value Description Low temperature error. 8 The ambient temperature may be too low. Set the ambient temperature within 0C {32F} and 40C {104F}, turn off the printer and then turn it back on. High temperature error. 9 The ambient temperature may be too high. Set the ambient temperature within 0C {32F} and 40C {104F}, turn off the printer and then turn it back on. 10 Roll media cover open. Close the roll media cover. Ink cartridge cover open. Close the ink cartridge cover. 11 In case of replacing the ink cartridge, please follow the replacement procedure which is described on the ink cartridge. Media jam. 12 Open the roll media cover and remove the jammed media, then close the roll media cover. Media jam. 13 Open the roll media cover and remove the jammed media. Then close the roll media cover and reload the fanfold media. Replace the ink cartridge. 15 Epson brand products are recommended. Ink cartridge needs replacing, or cannot be recognized correctly. 16 Replace the ink cartridge. Epson brand products are recommended. New media is loaded without removing the existing media. 17 Remove the loaded new media once. Remove any media which is still in the printer and load the new media again. Media cannot be recognized correctly. 20 Check the media type which printer supports, then set the correct media. 6 Loaded media size does not match the specified setting. 21 Load the correct size media which you want print. Media source setting is not saved correctly. 22 Specify the correct media source again. The media source could not be changed because media remain in the printer. 101 Please remove the remaining media before change the setting. The media source could not be changed because print head is cleaning or other 102 reason. Please change the setting again after a while. 135

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
Chapter 6
Application Development Information
135
6
8
Low temperature error.
The ambient temperature may be too low. Set the ambient temperature within 0
C
{32
F} and 40
C {104
F}, turn off the printer and then turn it back on.
9
High temperature error.
The ambient temperature may be too high. Set the ambient temperature within
0
C {32
F} and 40
C {104
F}, turn off the printer and then turn it back on.
10
Roll media cover open. Close the roll media cover.
11
Ink cartridge cover open.
Close the ink cartridge cover.
In case of replacing the ink cartridge, please follow the replacement procedure
which is described on the ink cartridge.
12
Media jam.
Open the roll media cover and remove the jammed media, then close the roll
media cover.
13
Media jam.
Open the roll media cover and remove the jammed media.
Then close the roll media cover and reload the fanfold media.
15
Replace the ink cartridge.
Epson brand products are recommended.
16
Ink cartridge needs replacing, or cannot be recognized correctly.
Replace the ink cartridge.
Epson brand products are recommended.
17
New media is loaded without removing the existing media.
Remove the loaded new media once. Remove any media which is still in the
printer and load the new media again.
20
Media cannot be recognized correctly.
Check the media type which printer supports, then set the correct media.
21
Loaded media size does not match the specified setting.
Load the correct size media which you want print.
22
Media source setting is not saved correctly.
Specify the correct media source again.
101
The media source could not be changed because media remain in the printer.
Please remove the remaining media before change the setting.
102
The media source could not be changed because print head is cleaning or other
reason.
Please change the setting again after a while.
Return Value
Description