Epson ColorWorks C3400-LT Technical Reference Guide - Page 97

Chapter 5 Setting the Printer Driver [Maintenance And Utilities] tab Make the following settings to the printer. Post-Printing Verification Settings Changes settings of operation, registration of invalid images to the documents, test printing of invalid images at missing dots. Following are the modes for operation setting when Post-Printing Verification Settings. • Anti-missing Color Mode: Executes cleaning when two or more dots are missing side by side in the paper feed direction, or three or more dots are missing arbitrarily. • Anti-missing Read Mode: Executes a head cleaning when any dot is missing. • High Reliability Mode (Reprint) / Economy Mode for Low Print Volume (Reprint): When dot missing occurs, the EPSON Status Monitor 3 is displayed. Select the next operation from [Restart printing] (printing the next data) and [Reprint] (reprinting after dot missing is resolved by the auto head cleaning.) • High Reliability Mode (Void Image Reprint) / Economy Mode for Low Print Volume (Void Image Print): Prints the image that indicates dot missing and reprints the same data when any dot is missing. Cuts and prints the top of the void images if the paper height is less than one inch.  The button for [High reliability mode (Void Image Test Print)] or [Economy Mode for Low Print Volume (Void Image Print)] on [Driver Preferences] is grayed out when [Use EPSON Status Monitor 3] on [Driver Preferences] of [Driver Utilities] is not selected.  The dots may be missing due to mis-reading when "Anti-missing Color Mode" is selected. It is recommended to use "Anti-missing Read Mode" or "High Reliability Mode" to avoid such dot missing from mis-reading. Notification Settings Makes settings of the buzzer on/off, the printer status utility notification at the ink low status and the paper type error notification when such error occurs. Panel Button Settings 5 Among the panel buttons on the printer, enable/disable the FEED button and the CUT button. Media position detection Changes the media position detection setting based on the type of paper. The paper error occurs when the printer setting is not matched with the paper type and printing can not be performed. See "Replacing the Paper" on page 139 for details about this adjustment. Media Loading Settings Changes settings of the paper set operation and auto-cut function when powering on and closing the cover. 97