Epson ColorWorks C3400-LT Technical Reference Guide - Page 161

Chapter 7 Maintenance Setting the Media Position Detection When changing to paper of a different type or shape, you will need to set the media position detection. When there is no change in the media position detection setting, this setting is not necessary. If the printer setting and the paper type do not match, printing is not possible and a paper error will occur. Set the settings based on the table below. Setting Method Set the media position detection by following the steps below. When paper remains in the printer, media position detection cannot be set. Be sure to remove the paper before turning on the printer. 1 Turn the printer on. 2 Remove the paper in the printer. 3 Display the printer driver window. (See "How to Display the Printer Driver" on page 65 for how to display the driver window.) 4 Change [Media position detection] on [Maintenance And Utilities] tab of the printer driver depending on the paper to use. Paper type Media position detection setting Roll paper Receipt/Full-page Label/ Transparent Full-page Label Not applied Black Mark Die-cut Label Detects black marks of die-cut label Black Mark Receipt/Wrist Band Detects black marks of receipt Die-cut Label/Black Mark Die-cut Label/ Detects the gap between labels Transparent Die-cut Label 7 161