Epson ColorWorks C3400-LT Technical Reference Guide - Page 167
Self-test, Set the die-cut label, receipt or continuous label which length is 90 mm
![]() |
View all Epson ColorWorks C3400-LT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Chapter 7 Maintenance Self-test Printing errors such as dot missing can be checked on self-test mode. In addition, Post-Printing Verification Settings, and media position detection setting can be checked. Follow the steps below to run the self-test. 1 Set the die-cut label, receipt or continuous label which length is 90 mm or more. 2 Verify that the printer is off. 3 Turn on the printer while pressing the paper feed button. Following test pattern is printed. Post-Printing Verification Setting Media Position Dctection 7 167
![](/manual_guide/products/epson-c3400lt-technical-reference-guide-db47ccf/167.png)
Chapter 7
Maintenance
167
7
Self-test
Printing errors such as dot missing can be checked on self-test mode. In addition, Post-Printing
Verification Settings, and media position detection setting can be checked.
Follow the steps below to run the self-test.
1
Set the die-cut label, receipt or continuous label which length is 90 mm
or more.
2
Verify that the printer is off.
3
Turn on the printer while pressing the paper feed button.
Following test pattern is printed.
Post-Printing Verification Setting
Media Position Dctection