Epson DS-40 User Manual - Page 33
Using WPS PIN Mode to Connect to a Network, Connect, Parent topic, AP mode
View all Epson DS-40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. Press and hold the Connect button on the scanner for at least 3 seconds, then release it when the ready and Wi-Fi lights flash alternately. The scanner enters standby mode for WPS connection for two minutes. 4. Press the WPS button on your router or access point. The ready and Wi-Fi lights on the scanner stay on, indicating that the scanner is connected to the network. 5. 6. Set up network scanning on your computer. Parent topic: Wi-Fi Protected Setup (WPS) Using WPS PIN Mode to Connect to a Network If you have a WPS-enabled wireless router or access point that supports PIN mode, you can use Wi-Fi Protected Setup (WPS) PIN mode to connect your scanner to the network. 1. Set the connection mode switch on the scanner to AP mode. 33
3.
Press and hold the
Connect
button on the scanner for at least 3 seconds, then release it when the
ready and
Wi-Fi lights flash alternately.
The scanner enters standby mode for WPS connection for two minutes.
4.
Press the
WPS
button on your router or access point.
The ready and
Wi-Fi lights on the scanner stay on, indicating that the scanner is connected to the
network.
5.
6.
Set up network scanning on your computer.
Parent topic:
Wi-Fi Protected Setup (WPS)
Using WPS PIN Mode to Connect to a Network
If you have a WPS-enabled wireless router or access point that supports PIN mode, you can use Wi-Fi
Protected Setup (WPS) PIN mode to connect your scanner to the network.
1.
Set the connection mode switch on the scanner to
AP mode
.
33