Epson DS-40 User Manual - Page 60
A WPS or AirStation One-Touch Secure System AOSS error has, USB connection, Light status
View all Epson DS-40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
1 The low battery light 2 The Wi-Fi light 3 The ready light USB connection Light status The ready light is on The ready light is flashing The ready light and the Wi-Fi light are flashing alternately The ready light and the Wi-Fi light are flashing at the same time Condition/solution The scanner is turned on and ready to scan. The scanner is scanning or initializing. Wait for the ready light to stop flashing before turning off the scanner. The scanner is calibrating or feeding a cleaning sheet. The scanner firmware is updating. Do not turn off the scanner or disconnect any cables until the status lights have stopped flashing. A paper is jammed. Reload the original. If the lights continue to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support. Wireless connection Light status Condition/solution The ready light is on The scanner is turned on and ready to scan. The ready light is flashing The scanner is scanning or initializing. Wait for the ready light to stop flashing before turning off the scanner. The scanner is calibrating or feeding a cleaning sheet. The ready light is on and the A WPS or AirStation One-Touch Secure System (AOSS) error has Wi-Fi light is flashing occurred. Retry the connection. The ready light is flashing and The product is scanning or connecting to a wireless network. the Wi-Fi light is on 60