Epson Expression 636 User Setup Information - PC - Page 6
Before You Begin, Setting Up Your Scanner, Caution
View all Epson Expression 636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Before You Begin Be sure to read the safety instructions and guidelines for choosing a place for your scanner in your Expression 636 User's Guide. Setting Up the Scanner 1. Take the scanner out of the box and remove all packing materials. 2. Place the scanner on a flat, stable surface with the scanner's rear panel facing you. 3. Release the transportation lock lever by sliding it to the UNLOCK position. 4. Connect the power cable to the power inlet on the back of the scanner and plug the other end into a properly grounded outlet as shown below. c Caution: There are several versions of this scanner designed for different voltages, and it is not possible to change the scanner's voltage. If the label on the back of the scanner does not show the correct voltage for your country, contact your dealer. UNLOCK OPTION LOCK SCSI SCSI ON 0 1 7 2 OFF SW 6 SCSI5ID4 3 PARALLEL FG 4 Before You Begin