Epson F9200 User Manual - Page 184

Print Head Moves But Nothing Prints If the print head is moving and nothing prints, try these solutions: • Print a nozzle check pattern. If the pattern does not print correctly, clean the print head again. (If the printer has not been used for a long time the nozzles may be clogged.) • If you see the message Motor Self Adjustment on the product's LCD screen, the printer is adjusting its internal motor. Wait a few moments for the message to disappear and do not turn off the printer. Parent topic: Solving Printing Problems Related tasks Checking for Clogged Print Head Nozzles Cleaning the Print Head Media is Creased If media loaded in your printer is creased, try these solutions: • Check that the Feeding Tension and Feed Speed settings on the product control panel are correct for the currently loaded media. • If you printed thin media or media lengthened by water absorption at a high density take-up setting, creases that look like this may appear in the media in the after heater: Set the Take-up Tension setting to Manual and decrease the tension values, or print on thicker media. 184