Epson F9200 User Manual - Page 97
Stirring High Density Black Ink, Head Maintenance, Parent topic
View all Epson F9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
1. When the product is turned on, press the maintenance button on the control panel. You see the Maintenance menu. 2. Press the up or down arrow buttons on the control panel to select Head Maintenance and press the OK button. The print head moves into maintenance position. 3. Perform your maintenance task as necessary. Note: After 10 minutes, a alarm sounds to warning you that the print head is still in maintenance position. You also see a notice on the LCD screen telling you to clean the print heads after maintenance. After completing your maintenance task, press the OK button to clean the print heads. The alarm sounds again at 10 minute intervals if the print heads are not in the home position. Parent topic: Preparing for Maintenance Stirring High Density Black Ink To prevent sedimentation and incorrect colors in your printed media, stir the High Density Black ink in the ink tank once a week. 1. Open the ink inlet cover for the High Density Black ink shown here. 97