Epson F9200 User Manual - Page 81
Media Size Check, Take-up Tension
View all Epson F9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Options Tension Measurement Feeding Tension Take-up Tension Feed Speed Prevent Sticking Restore Settings RIP Settings options Options Platen Gap Description Selects how often tension is measured and automatically adjusted: Periodically: recommended for most media. Every page: provides more precise tensioning (but slower printing). Select Auto for most media. When you select Manual, you can set a value from 0 to 40. If media creases, set the value higher than Lv32. If banding appears, set the value lower than Lv32. When Media Size Check is off, select Manual and set the value based on the media width. Select Auto for most media. When you select Manual, you can set a value from 1 to 9. If media wrinkles, banding appears, or ink sticks to the back of the take-up roll, set the value lower than Lv7. If thick media cannot be wound correctly, set the value higher than Lv7. Select Lv2 for most media. Select Lv1 for thin media if it is creased, torn, stuck together, or if horizontal banding appears. Select On only if the media sticks to the platen when the printer is turned on or when printing starts. Select Yes to return all settings for the selected media to their default values. Description Select 2.0 for most media. Select 1.5 if print quality is unsatisfactory. Select 2.5 only if printouts are scratched or smudged. Choosing a larger gap than necessary can cause ink stains inside the printer, reduced print quality, or shorter product life. 81