Epson PowerLite 1716 User's Guide - Page 49
Connecting to a Digital Camera or Other Device, Removing the USB Cable - multimedia projector
View all Epson PowerLite 1716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Connecting to a Digital Camera or Other Device You can connect your digital camera, USB flash memory drive, USB hard drive, or multimedia storage viewer, such as the Epson P-6000 or iPod® photo. Use the USB cable specified for your device. Then you can use your device's slideshow function or the projector's EasyMP PC Free feature (see the EasyMP Operation Guide for details) to present images. 1. Connect the flat end of the USB cable to the Type A USB port on the projector, as shown. note Use a cable less than 10 feet long and connect the camera directly to the projector. Your projector may not function correctly if you use a longer cable or connect your camera to a USB hub. If you connect a USB hard drive, make sure you use the AC adapter to power the hard drive. The slideshow function on some devices may not work with the USB connection. 2. Connect the other end of the cable to your camera or other device. Removing the USB Cable If you're using PC Free mode to project your images, exit PC Free mode before you remove the USB cable from the projector. 1. Position the cursor over the Exit button in the upper right corner of the PC Free screen. 2. Press the Enter button on the remote control to close PC Free mode. 3. Disconnect the USB cable. Connecting to Computers, Cameras, and Other Equipment 49