Epson PowerLite 85 Operation Guide - EasyMP - Page 61

Troubleshooting 61 Check Is the network cable connected correctly? For Wired LAN Remedy Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly. Cannot connect in Advanced Connection Mode or Wired LAN connection Check Remedy Are the SSID settings for the computer, access point, and Set the computer, the access point, and the projector to the same SSID. See your User's Guide for more projector different? information. Are the WEP keys set properly? When selecting WEP from Security, set the access point, the computer, and the projector to the same WEP key. See your User's Guide for more information. Are the connection denial functions, such as MAC Address Set the projector to allow connections from the access point. restrictions and port restrictions, set correctly at the access point? Are the IP address, the Subnet Mask, and the Gateway Address for the access point and the projector set correctly? When not using a DHCP, adjust each setting. See your User's Guide for more information. Are the access point and the projector's subnet different? Select Manual search from EMP NS Connection, specify the IP address, and connect. s p.34 The Slide show cannot be displayed on the desired display when the multi-screen display function is being executed. Check Are you using PowerPoint 2002 or an earlier version? For Windows Remedy To set and use two or more virtual displays, use PowerPoint 2003 or later, or limit the number of virtual displays to one before displaying the Slide show.