Epson PowerLite 9100i User Manual - Page 43
Connecting S-Video or Component Video
View all Epson PowerLite 9100i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Connecting S-Video or Component Video Before starting, make sure the projector and your VCR or other video source are turned off. 1. For S-Video, insert one end of an S-Video cable into the projector's S-Video connector. Insert the other end into the S-video-out port of your video source. S-Video connector S-Video cable For component video, connect the three ends of a BNC cable into the projector's R, G, and B ports. (Don't connect the cables to the projector's H/C Sync or VSync ports.) Insert the opposite ends of the cable into the corresponding ports of your video source. If the image doesn't display properly, you may need to change the BNC parameter in the projector's Setting menu. See page 69. 2. If you'll be using audio, connect the RCA audio cable to the S-Audio and Audio2 ports of the projector. Connect the plugs at the other end of the cable to the audio output ports of the video source. note Contact your video manufacturer or other video or electronics dealer to obtain a component video cable. Setting Up the Projector 37