Epson PowerLite Home 10 User Manual - Page 28
Replacing the Lamp
View all Epson PowerLite Home 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Replacing the Lamp It's time to replace the lamp when: ■ The projection image gets darker or starts to deteriorate. ■ The projector's warning light flashes red at half second intervals. ■ The message Replace the lamp appears on the screen when you start projecting. Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L2H. In Canada, call (800) 463-7766 for dealer referral. Be sure to read the "Important Safety Information" on page 5 before replacing the lamp. Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. If your projector is mounted on the ceiling, take it down before beginning this procedure. The lamp component contains mercury. Please consult your state and local regulations regarding proper disposal or recycling, and do not place in the trash. Caution: Never touch the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp. Follow these steps to replace the lamp: 1. Turn off the projector and wait for the P power light to stop flashing. 2. Unplug the power cord and any cables. 3. If the projector has been on, let it cool for at least an hour. 4. Press in on the two tabs and lift the lamp cover up and off. . 28