Epson Stylus NX305 Quick Guide - Page 21

3. Do one of the following to dial the fax number: ■ Use the numeric keypad to manually enter the fax number. You can enter up to 64 digits. ■ Press Redial/Pause to redial the last fax number you used. The last fax number is displayed on the screen. ■ Press Speed Dial/Group Dial/Backspace to select a speed dial/group dial entry. Select or type the number of the speed dial/group dial entry you want to use, then press OK. You see the screen at right. Press 1 to enter another number or press 2 to continue with your selection. ■ Press a one-touch dial button to select one of the first five speed dial/ group dial entries, then press OK. Press 1 to enter another number or press 2 to continue with your selection. (See page 23 for the paper insert.) ■ If you've connected a telephone to the NX300/305 Series, dial the number from the phone. You see the screen at right. Press 1 to confirm. Note: Don't hang up the phone until you begin transmitting the fax in step 5. 4. Press Menu to change any of the following fax settings: ■ Resolution to increase the scanning resolution of a faxed document. ■ Contrast to change the contrast of the faxed document. ■ Send Fax Later to specify a different time to send your fax. (You cannot send another fax until the delayed fax has been sent or cancelled.) ■ Fax Mode to select Sending (to send faxes as usual) or Poll to Receive (to receive a fax from another fax machine to which you have dialed, such as a fax information service). Press Menu when you're done selecting settings. 5. Press the x B&W or x Color button to send your fax. To cancel faxing, press y Stop/Clear Settings at any time. Note: If the recipient's fax machine prints only in black and white, your fax is automatically sent in black and white even if you select color. Sending a Fax 21